| Model 8000 NRM |
|
| Displayed Measurement Range |
0.001 to 60 ppb |
| Response time to impurity change |
< 90 seconds |
| Sample flow rate |
2 mL/min (calibrated drip counter flow meter) |
| Total flow rate |
100 mL/min |
| Inlet water pressure |
138 to 483 kPa; 20 to 70 psig (a suitable water drain is required) |
| Compressed air flow rate/pressure |
5 L/min at 345 kPa; 50 psig (compressed air should be dry and free of particles. Nitrogen may be substituted for compressed air) |
| Residue drying temperature |
120C; 248F |
| Wetted surface materials |
Sapphire, PFA Teflon, PTFE, and 316 L stainless steel |
| Detector working fluid |
Water, supplied by UPW system |
| Ambient temperature range |
15-35C; 59-95 F |
| Maximum water temperature |
50C; 122F |
| Dimensions (WDH) |
43 x 36 x 22 cm; 17 x 14 x 8.5 inches |
| Weight |
8 Kg; 18 lbs |
| Power |
Universal 100 to 230 VAC, 50/60 Hz, 125 VA |
| Output |
USB, RS-232 and 4-20 mA; Ethernet adapter included |
| Ultrapure water inlet |
114 inch PFA Flaretek |
| Waste outlet |
1/2 inch SS Swagelok |
| Compressed air inlet |
1/4 inch SS Swagelok |
| Software |
Data acuisition program included, Windows XP platform |